| Customization: | Available |
|---|---|
| Application: | Car |
| Hardness: | Hardened Tooth Surface |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| 1 | WG2229040315 | Spindle rear oil guide joint |
| 2 | AZ2208040004 | Adjustment pad for spindle rear bearing outer ring |
| 3 | WG2229040313 | Spindle rear bearing retainer |
| 4 | AZ2208040003 | Spindle rear bearing inner ring adjusting pad set |
| 5 | WG2229040316 | Spindle rear bearing seal ring 1 |
| 6 | WG2229040317 | Spindle rear bearing seal ring 2 |
| 7 | WG2229040312 | Spindle rear bearing seal sleeve |
| 8 | WG9003323221 | Spindle rear taper bearing 32216 |
| 9 | WG2229040309 | Reverse gear thrust pad |
| 10 | AZ2210040406 | Main shaft reverse gear |
| 11 | WG2229020020 | Input shaft gear lock ring |
| 12 | AZ2210040711 | Reverse gear cone ring |
| 13 | WG9003990424 | Needle roller bearing K96X104X24 |
| 14 | WG2229040306 | Needle roller bearing ring for three reverse gear |
| 15 | WG2229040308 | One and two gear block retaining ring |
| 16 | AZ2210040734 | An inverted gear sleeve |
| 17 | AZ2210040710 | One reverse gear holder |
| 18 | WG2229100211 | Synchronizer spring |
| 19 | WG2229040301 | Synchronizer lock block |
| 20 | WG2229040327 | Synchronizer lock block seat |
| 21 | WG2203040451 | First and second gear synchronous ring assembly |
| 22 | AZ2210040742 | One and two block cone disk |
| 23 | AZ2210040405 | Main shaft one gear |
| 24 | WG9003990428 | Needle roller bearing K96x104x27.5 |
| 25 | AZ2210040401 | The spindle |
| 26 | WG9003990428 | Needle roller bearing K96x104x27.5 |
| 27 | AZ2210040404 | Main shaft second gear |
| 28 | AZ2210040742 | One and two block cone disk |
| 29 | WG2203040451 | First and second gear synchronous ring assembly |
| 30 | AZ2210040737 | Sliding gear sleeve for second and third gear |
| 31 | AZ2203040452 | Second and third gear holder assembly |
| 32 | WG2229100211 | Synchronizer spring |
| 33 | WG2229040301 | Synchronizer lock block |
| 34 | WG2229040327 | Synchronizer lock block seat |
| 35 | WG2229040306 | Needle roller bearing ring for three reverse gear |
| 36 | WG9003990424 | Needle roller bearing K96X104X24 |
| 37 | WG2203040451 | First and second gear synchronous ring assembly |
| 38 | AZ2210040742 | One and two block cone disk |
| 39 | AZ2210040403 | Main shaft three gears |
| 40 | WG2229040304 | Four gear hobbing pin bearing ring |
| 41 | WG9003999725 | Needle roller bearing K90X97X25 |
| 42 | WG2229040305 | Three gear thrust pad |
| 43 | AZ2210040402 | Main shaft four gears |
| 44 | WG2229020020 | Input shaft gear lock ring |
| 45 | AZ2210020502 | Third and fourth gear cone rings |
| 46 | WG2210040702 | Third and fourth gear synchronous ring |
| 47 | AZ2210040736 | Sliding gear sleeve for four or five gears |
| 48 | AZ2210040701 | Four five gear holder |
| 49 | WG2229040307 | Synchronizer lock spring |
| 50 | WG2229040301 | Synchronizer lock block |
| 51 | WG2229040326 | Synchronizer lock block seat |
| 52 | WG2210040702 | Third and fourth gear synchronous ring |
| 53 | AZ2210020502 | Third and fourth gear cone rings |
| 54 | WG2229020020 | Input shaft gear lock ring |
| 55 | WG2229040310 | Lock nut washer and lock plate |
| 56 | WG2229040311 | Spindle lock nut |
| 57 | WG9003324395 | Spindle front bearing SKF4395 |
| 58 | WG2229040314 | Spindle front oil connector |
Transmission assemblies include Eaton Fuller, FAST, Allison, Dongfeng, Mercedes-Benz, HOWO, WLY and other brands. Used in trucks, buses, excavators, tractors and many other fields. Transmission parts include gears, synchronizers, input/output shafts, countershafts, bearings, power take-offs, boosters, housings, shift mechanisms, sensors, wiring harnesses, repair kits, transmission diagnostic tools, and transmission control systems. . . etc.
Jinan Zichen Trading Co.,Ltd is a reliable company integrating the design, development, production and sales of transmission assemblies and parts. Our products have been exported to more than 50 countries and regions including Russia, Italy, Indonesia, South Africa, Zambia, Iran, Kazakhstan, Iraq, Armenia, Philippines, South Korea, Ecuador, Australia, and New Zealand, and have been unanimously recognized by customers.
Our Services
1) Reply your enquiry in 2 working hours.
2) 100% delivery of all same quality.
3) Long lasting working life time.
4) Small order acceptable.
5) Timely delivery
6) Excellent after-sale service
7) Parts center build support for our dealers.
Q1: What if i can not provide part number for reference?
A: If no part number, we can judge and quote the requested parts by engine name-plate or photos;
It would be great if you could provide us with the chassis number(VIN) so that we can provide a
more comprehensive analysis and accurate quote feedback based on your truck model.
Q2: Can we buy 1 pcs of truck parts for quality testing?
A: Yes, we are glad to send 1pcs item for quality testing if we have the truck parts of you need in stock.
Q3: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q4: How do you make our business long-term and good relationship?
A: We keep good quality and competitive price to ensure our customers benefit; We respect every customer
as our friend and we sincerely do business and make friends with them, no matter where they come from.
Q5: How long is the production time of the goods?
A: We have sufficient stock of regular specifications for immediate delivery; Non-conventional specifications
generally require stocking for about 7-10 days; Large quantities order need to be in stock for about 15-20 days.
Q6: What is the packing?
A: Neutral packing of paper carton or wooden case. Or we customize the packaging according to your requirements
){kind=link}